Foster Systems


AtPark Monitor II w/ Combiner

AtPark Monitor II w/ Combiner Image
Detail Image

This device produces focused, monochrome polarized light. The light reflects on a 1" diameter button and returns to the device. Because the light is polarized, it is very sensitive to the orientation of the reflector in 2 dimensions. When placed on your telescope OTA, the reflector will "reflect" back to the sensor only when the OTA is in a specific location in RA and DEC (the park position). Any other orientation will not put the beam on the sensor.

If light is not on the sensor, an electrical circuit (2 wires) will "open". When these wires are incorporated in series with the SafeLoop, our controllers will inhibit roof/shutter movement when the "loop" is broken (OTA not in position).

Includes a small reflector, suitable for mounting on your OTA or rail.

We offer a mounting bracket, shown in the figure, as an option.

This AtPark combiner package has one sensor plus the combiner box shown in the figure and allows for 3 of these sensors to be integrated in series and also will supply 12 VDC to the connected sensors.

12VDC is required. Supply or order separately.

Our most recent Roof and Dome Rotation controllers have 4 terminals which will accept the appropriate wiring and power for the combiner. So all you need is the sensor and a bracket. Check on your controller board. If the board version is E3 or higher (e.g. E5,F2), then you have an AtPark capable board.

Your Price:$84.50
Weight:1.900 lbs